Code Extraction
PIC10F200,PIC10F202,PIC10F204 and PIC10F206 is 6-Pin, 8-Bit Flash Microcontrollers.For PIC10F206 MCU Code Extraction, PIC10F206 IC Crack, PIC10F206 MCU Break, and other Microchip IC Attack. we use high-end technologies and the latest laboratory equipment to perfect the technique of microcontroller code recovering (extracting the code from locked microcontrollers). We had analyzed a wide variety of chip types which are commonly used in different industries, which enable us to open the chips and extract the program inside with quick speed and accuracy, and thus help lauching your project quicker and cheaper.
High-Performance RISC CPU:
• Only 33 single-word instructions to learn
• All single-cycle instructions except for program branches, which are two-cycle
• 12-bit wide instructions
• 2-level deep hardware stack
• Direct, Indirect and Relative Addressing modes for data and instructions
• 8-bit wide data path
• 8 Special Function Hardware registers
• Operating speed:
– 4 MHz internal clock
– 1 μs instruction cycle
Special Microcontroller Features:
• 4 MHz precision internal oscillator:
– Factory calibrated to ±1%
• In-Circuit Serial Programming™ (ICSP™)
• In-Circuit Debugging (ICD) support
• Power-on Reset (POR)
• Device Reset Timer (DRT)
• Watchdog Timer (WDT) with dedicated on-chip RC oscillator for reliable operation
• Programmable code protection
• Multiplexed MCLR input pin
• Internal weak pull-ups on I/O pins
• Power-saving Sleep mode
• Wake-up from Sleep on pin change
Low-Power Features/CMOS Technology:
• Operating Current:
– < 350 μA @ 2V, 4 MHz
• Standby Current:
– 100 nA @ 2V, typical
• Low-power, high-speed Flash technology:
– 100,000 Flash endurance
– > 40 year retention
• Fully static design
• Wide operating voltage range: 2.0V to 5.5V
• Wide temperature range:
– Industrial: -40°C to +85°C
– Extended: -40°C to +125°C
Peripheral Features (PIC10F200/202):
• 4 I/O pins:
– 3 I/O pins with individual direction control
– 1 input only pin
– High current sink/source for direct LED drive
– Wake-on-change
– Weak pull-ups
• 8-bit real-time clock/counter ((TMR0) with 8-bit programmable prescaler
Peripheral Features (PIC10F204/206):
• 4 I/O pins:
– 3 I/O pins with individual direction control
– 1 input only pin
– High current sink/source for direct LED drive
– Wake-on-change
– Weak pull-ups
• 8-bit real-time clock/counter (TMR0) with 8-bit programmable prescaler
• 1 Comparator:
– Internal absolute voltage reference
– Both comparator inputs visible externally
– Comparator output visible externally
If you need to read the code from the protected chip PIC10F206/ PIC10F204/ PIC10F202/ PIC10F200, we can help you to crack the MCU and extract the code from PIC10F206 succesfully. Welcome to contact us by Email or Skype.
